Description
Strong, Adjustable Clutch for Long Life
The Ogura PTO Clutch Brake provides excellent starting and stopping power for the cutter deck and an adjustable air gap for long life.
A deck for the long haul
Hero Cutter Decks in 42″, 52″ and 61″ are deep, fabricated and designed to handle a lot of grass at higher speeds, while producing an excellent quality-of-cut. Heavy-duty, aluminum, sealed ball bearing, blade-drive spindles provide long-term performance.
Proven strength
The SLS features the same tubular-steel main frame as the Liberty Z for unmatched strength and longevity.
Reliable power up to 24 HP
Briggs & Stratton engine options power ground speeds up to 7 mph.
Spend more time mowing
Fewer grease points mean less upkeep for owner convenience.
Spend more time in the seat
Sit more comfortably with a seat that allows natural airflow, optimal water drainage, and ergonomic comfort. An optional armrest kit accessory is available for those who prefer additional support.
Proven hydro transaxles
Get continuous power with the HydroGear ZT2200 (EZT) with 10cc pumps and 10cc motors.
Easily adjust height
Quickly adjust height-of-cut from 1½” to 4½” in ¼” increments.
Top maneuverability and performance
With rear tire size of 20×8-8 on the 42″ and 20×10-8 on the 52″ and 61” you’ll roll smoothly and evenly on any terrain.
| Model | Deck Width | Engine | Horsepower | MSRP |
|---|---|---|---|---|
| SLS-42H-20PX | 42″ | Briggs & Stratton® PXi Series™ | 20 | $4,399 |
| SLS-52H-22PX | 52″ | Briggs & Stratton® PXi Series™ | 22 | $4,550 |
| SLS-52H-24PX | 52″ | Briggs & Stratton® PXi Series™ | 24 | $4,575 |
| SLS-61H-24PX | 61″ | Briggs & Stratton® PXi Series™ | 24 | $4,825 |
| Product Dimensions* | 42″ SLS | 52″ SLS | 61″ SLS |
|---|---|---|---|
| Length | 67.5″ | 67.5″ | 73.5″ |
| Width (chute down) | 54.5″ | 64.5″ | 73.5″ |
| Width (chute in transport position) | 43″ | 53″ | 62″ |
| Height | 39″ | 39″ | 39″ |
| * Dimensions are approximate. | |||
| General | |
|---|---|
| Total Fuel Capacity | 3.5 gallons |
| Drive Tires | 20″ x 8″-8″ (42”)
20″ x 10″-8″ (52”) 20″ x 10″-8″ (61”) |
| Caster Tires | 11″ x 6″-5″ |
| Drive System | |
| Drive System Type | Hydro-Gear ZT2200 (EZT) |
| Internal Pumps | 10cc |
| Internal Motor | 10cc |
| Forward Ground Speed | 7 mph |
| Reverse Ground Speed | 5 mph |
| Parking Brake | Hand lever |
| Deck | |
| Cutting Widths | 42″, 52″ and 61″ |
| Type | Heavy-Duty Hero Cutter Deck |
| Cutting Height | 1.5″ to 4.5″ in .25″ increments |
| Lift | Foot-operated pedal |
| Construction | Dual-plate cutter deck constructed of 2 steel plates. Reinforcement plate at cutter deck spindles. |
| Spindles | Aluminum housing with sealed ball bearings. |
| Blade Engagement | Ogura GT1 (74 ft lb) – (42″)
Ogura GT1 (74 ft lb) – (52″) Ogura GT2 (108 ft lb) – (61”) Adjustable air-gap for extended life. |
Reviews
There are no reviews yet.